AMI UETBL207-20MZ20RFCEW Mounted Units & Inserts
With over 10170 full-service stores, our AMI UETBL207-20MZ20RFCEW Mounted Units & Inserts inventory is extensive and BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. our parts are priced right. within 24 hours. This helps you maximize your 80x170x39 productivity by saving time and your hard-earned dollars.
What is UETBL207-20MZ20RFCEW bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
UETBL207-20MZ20RFCEW |
| Weight: |
45.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Left Hand (CCW) |
| Model No.: |
2520VQ21A11-11CB20L |
| Port Size: |
2 1/2 |
| Port Type: |
Flange |
| Shaft Key: |
N/A |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
45.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Left Hand (CCW) |
| Model No. |
2520VQ21A11-11CB20L |
| Port Size |
2 1/2 |
| Port Type |
Flange |
| Shaft Key |
N/A |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
0.875 in |
| Shaft Type |
13 Tooth Splined |
| Pump Series |
2520VQ |
| Shaft Length |
1.375 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
2500 |
| Minor Diameter |
0.715 in |
| Mounting Flange |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
16/32 |
| Cover End RPM [Max |
2700 |
| Shaft End RPM [Max |
2500 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
0.873 in |
| Major Diameter [Min |
0.872 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
2520VQ21A11-11CB20L |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
16.5 |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
2.22 |
| Displacement Shaft End (cu in/revolution) |
4.12 |