1.378 Inch | 35 Millimeter x 1.689 Inch | 42.9 Millimeter x 1.874 Inch | 47.6 Millimeter IPTCI HUCNPP 207 35MM Pillow Block Bearings
High 1.378 Inch | 35 Millimeter x 1.689 Inch | 42.9 Millimeter x 1.874 Inch | 47.6 Millimeter Quality 1140 kN Basic dynamic load rating C 1.378 Inch | 35 Millimeter x 1.689 Inch | 42.9 Millimeter x 1.874 Inch | 47.6 Millimeter IPTCI HUCNPP 207 35MM Pillow Block Bearings. 0.3 Calculation factor kr Competitive BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. IPTCI Bearing Pricing. Accept Small Order. Easy and Fast Shipping.
What is HUCNPP 207 35MM bearing cross reference？
| Brand Name: |
IPTCI |
| Model Number: |
HUCNPP 207 35MM |
| Weight: |
76.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Model No.: |
3525VQ30A21-11BB20 |
| Port Size: |
3 |
| Port Type: |
Flange |
| Shaft Key: |
N/A |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
76.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Model No. |
3525VQ30A21-11BB20 |
| Port Size |
3 |
| Port Type |
Flange |
| Shaft Key |
N/A |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
1.25 in |
| Shaft Type |
14 Tooth Splined |
| Pump Series |
3525VQ |
| Shaft Length |
1 15/16 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
2500 |
| Minor Diameter |
1.04 in |
| Mounting Flange |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
12/24 |
| Cover End RPM [Max |
2500 |
| Shaft End RPM [Max |
2500 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3525VQ30A21-11BB20 |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
31.5 |
| GPM @ 1,800 rpm, Shaft End |
45 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
4.12 |
| Displacement Shaft End (cu in/revolution) |
5.96 |