IPTCI NAT 207 22 L3 Take Up Unit Bearings
What is BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. IPTCI NAT 207 22 L3 Take Up Unit Bearings in mechanical engineering? IPTCI Bearing Manufacturing Service . Upload 1080 kN Basic static load rating C0 your CAD file for 7.5 mm K 3 mm r1,2 min. an instant.
What is NAT 207 22 L3 bearing cross reference？
| Brand Name: |
IPTCI |
| Model Number: |
NAT 207 22 L3 |
| Weight: |
101.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Model No.: |
4525VQ60A17-11BB20 |
| Port Size: |
3 1/2 |
| Port Type: |
Flange |
| Shaft Key: |
N/A |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
101.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Model No. |
4525VQ60A17-11BB20 |
| Port Size |
3 1/2 |
| Port Type |
Flange |
| Shaft Key |
N/A |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
1.25 in |
| Shaft Type |
14 Tooth Splined |
| Pump Series |
4525VQ |
| Shaft Length |
1.9375 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
2200 |
| Minor Diameter |
1.04 in |
| Mounting Flange |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
12/24 |
| Cover End RPM [Max |
2200 |
| Shaft End RPM [Max |
2200 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Manufacturer Part No. |
4525VQ60A17-11BB20 |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
25.5 |
| GPM @ 1,800 rpm, Shaft End |
90 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) |
3.37 |
| Displacement Shaft End (cu in/revolution) |
11.8 |