0.787 Inch | 20 Millimeter x 1.22 Inch | 31 Millimeter x 1.311 Inch | 33.3 Millimeter IPTCI SUCTPA 204 20MM L3 Pillow Block Bearings
0.787 Inch | 20 Millimeter x 1.22 Inch | 31 Millimeter x 1.311 Inch | 33.3 Millimeter IPTCI SUCTPA 204 20MM L3 Pillow Block Bearings BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. Product Brochures 2080 kN Grease , IPTCI Bearing Manufacturing 220 mm d Service . Get Your 0.787 Inch | 20 Millimeter x 1.22 Inch | 31 Millimeter x 1.311 Inch | 33.3 Millimeter Free.
What is SUCTPA 204 20MM L3 bearing interchange？
| Brand Name: |
IPTCI |
| Model Number: |
SUCTPA 204 20MM L3 |
| Weight: |
76.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Model No.: |
3525VQ35A21-1BB20 |
| Port Size: |
3 |
| Port Type: |
Flange |
| Shaft Key: |
5/16 in |
| Pilot Type: |
Standard Pilot |
Product Details
| Weight |
76.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Model No. |
3525VQ35A21-1BB20 |
| Port Size |
3 |
| Port Type |
Flange |
| Shaft Key |
5/16 in |
| Pilot Type |
Standard Pilot |
| Shaft Dia. |
1.25 in |
| Shaft Type |
Straight w/ Key |
| Pump Series |
3525VQ |
| Shaft Length |
2 1/2 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
2400 |
| Minor Diameter |
N/A |
| Mounting Flange |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
N/A |
| Cover End RPM [Max |
2500 |
| Shaft End RPM [Max |
2400 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
N/A |
| Major Diameter [Min |
N/A |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3525VQ35A21-1BB20 |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
31.5 |
| GPM @ 1,800 rpm, Shaft End |
52.5 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
4.12 |
| Displacement Shaft End (cu in/revolution) |
6.88 |