NACHI IPH-36B-16-80-11 IPH Double Gear Pump
With over 10170 full-service stores, our BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. NACHI IPH-36B-16-80-11 IPH Double Gear Pump inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your 45x55x23 productivity by saving time and your hard-earned 53 kN Basic static load rating (C0) dollars.
What is IPH-36B-16-80-11 bearing interchange？
| Brand Name: |
NACHI |
| Model Number: |
IPH-36B-16-80-11 |
| Weight: |
30.0 LB |
| Mounting: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Model No.: |
V2010-1F12S2S-1DD12 |
| Port Size: |
1 1/2 |
| Port Type: |
Flange |
| Shaft Key: |
3/16 in |
| Pilot Type: |
N/A |
Product Details
| Weight |
30.0 LB |
| Mounting |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Model No. |
V2010-1F12S2S-1DD12 |
| Port Size |
1 1/2 |
| Port Type |
Flange |
| Shaft Key |
3/16 in |
| Pilot Type |
N/A |
| Shaft Dia. |
0.875 in |
| Shaft Type |
Straight w/ Key |
| Pump Series |
V2010 |
| Shaft Length |
2.3125 in |
| Seal Material |
Buna-N |
| Max. RPM [Max |
2400 |
| Minor Diameter |
N/A |
| Mounting Flange |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
N/A |
| Cover End RPM [Max |
3000 |
| Shaft End RPM [Max |
2400 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Major Diameter [Max |
N/A |
| Major Diameter [Min |
N/A |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Manufacturer Part No. |
V2010-1F12S2S-1DD12 |
| Cover End Pressure [Max |
2500 |
| Shaft End Pressure [Max |
2200 |
| GPM @ 1,800 rpm, Cover End |
3 |
| GPM @ 1,800 rpm, Shaft End |
18 |
| Integral Valve Configuration |
N/A |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End |
1/2 in SAE O-Ring |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
0.4 |
| Displacement Shaft End (cu in/revolution) |
2.38 |