1.688 Inch | 42.875 Millimeter x 2.094 Inch | 53.18 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE P2B-DLM-111 MOD Pillow Block Bearings
How do you BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. find 0 Weight the NSK Manufacturer Name 1.688 Inch | 42.875 Millimeter x 2.094 Inch | 53.18 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE P2B-DLM-111 MOD Pillow Block Bearings specification? Manufacturers Online Free 1.688 Inch | 42.875 Millimeter x 2.094 Inch | 53.18 Millimeter x 2.25 Inch | 57.15 Millimeter check!
What is P2B-DLM-111 MOD bearing interchange?
Brand Name: | DODGE |
Model Number: | P2B-DLM-111 MOD |
Weight: | 76.0 LB |
Mounting: | Flange Mount |
Rotation: | Left Hand (CCW) |
Model No.: | 3525VQ35A21-1AA20LH |
Port Size: | 3 |
Port Type: | Flange |
Shaft Key: | 5/16 in |
Pilot Type: | Standard Pilot |
Product Details
Weight | 76.0 LB |
Mounting | Flange Mount |
Rotation | Left Hand (CCW) |
Model No. | 3525VQ35A21-1AA20LH |
Port Size | 3 |
Port Type | Flange |
Shaft Key | 5/16 in |
Pilot Type | Standard Pilot |
Shaft Dia. | 1.25 in |
Shaft Type | Straight w/ Key |
Pump Series | 3525VQ |
Shaft Length | 2 1/2 in |
Seal Material | Buna-N |
Max. RPM [Max | 2400 |
Minor Diameter | N/A |
Mounting Flange | SAE C, 2 Bolt |
Shaft Seal Type | Single Shaft Seal |
Spline Description | N/A |
Cover End RPM [Max | 2500 |
Shaft End RPM [Max | 2400 |
Controlled Flow Rate | N/A |
Cover End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Major Diameter [Max | N/A |
Major Diameter [Min | N/A |
Minor Diameter [Max | N/A |
Minor Diameter [Min | N/A |
Relief Valve Setting | N/A |
Shaft End Flow @ RPM | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Manufacturer Part No. | 3525VQ35A21-1AA20LH |
Cover End Pressure [Max | 3000 |
Shaft End Pressure [Max | 3000 |
GPM @ 1,800 rpm, Cover End | 31.5 |
GPM @ 1,800 rpm, Shaft End | 52.5 |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Cover End | Outlet 135° CCW from Inlet |
Port Orientation - Shaft End | Outlet Opposite Inlet |
Pressure Port Size, Cover End | 1 in Flange |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.12 |
Displacement Shaft End (cu in/revolution) | 6.88 |