1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.688 Inch | 42.875 Millimeter IPTCI UCP 206 18 Pillow Block Bearings
1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.688 Inch | 42.875 Millimeter IPTCI UCP 206 18 Pillow Block Bearings 1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.688 Inch | 42.875 Millimeter Needs Analysis , IPTCI Bearing Manufacturing Service . 14200 N Basic Dynamic Radial Load Rating C Get Your BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. Free.
What is UCP 206 18 bearing interchange?
Brand Name: | IPTCI |
Model Number: | UCP 206 18 |
Weight: | 76.0 LB |
Mounting: | Flange Mount |
Rotation: | Left Hand (CCW) |
Model No.: | 3525VQ38A21-11DC20-LH |
Port Size: | 3 |
Port Type: | Flange |
Shaft Key: | N/A |
Pilot Type: | Standard Pilot |
Product Details
Weight | 76.0 LB |
Mounting | Flange Mount |
Rotation | Left Hand (CCW) |
Model No. | 3525VQ38A21-11DC20-LH |
Port Size | 3 |
Port Type | Flange |
Shaft Key | N/A |
Pilot Type | Standard Pilot |
Shaft Dia. | 1.25 in |
Shaft Type | 14 Tooth Splined |
Pump Series | 3525VQ |
Shaft Length | 1 15/16 in |
Seal Material | Buna-N |
Max. RPM [Max | 2400 |
Minor Diameter | 1.04 in |
Mounting Flange | SAE C, 2 Bolt |
Shaft Seal Type | Single Shaft Seal |
Spline Description | 12/24 |
Cover End RPM [Max | 2500 |
Shaft End RPM [Max | 2400 |
Controlled Flow Rate | N/A |
Cover End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Major Diameter [Max | 1.248 in |
Major Diameter [Min | 1.247 in |
Minor Diameter [Max | N/A |
Minor Diameter [Min | N/A |
Relief Valve Setting | N/A |
Shaft End Flow @ RPM | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Manufacturer Part No. | 3525VQ38A21-11DC20-LH |
Cover End Pressure [Max | 3000 |
Shaft End Pressure [Max | 3000 |
GPM @ 1,800 rpm, Cover End | 31.5 |
GPM @ 1,800 rpm, Shaft End | 57 |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Cover End | Outlet 45° CW from Inlet |
Port Orientation - Shaft End | Outlet 90° CW from Inlet |
Pressure Port Size, Cover End | 1 in Flange |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.12 |
Displacement Shaft End (cu in/revolution) | 7.42 |