NACHI IPH-36B-16-80-11 IPH Double Gear Pump
With over 10170 full-service stores, our BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. NACHI IPH-36B-16-80-11 IPH Double Gear Pump inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your 45x55x23 productivity by saving time and your hard-earned 53 kN Basic static load rating (C0) dollars.
What is IPH-36B-16-80-11 bearing interchange？
| Brand Name: | NACHI |
| Model Number: | IPH-36B-16-80-11 |
| Weight: | 30.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Model No.: | V2010-1F12S2S-1DD12 |
| Port Size: | 1 1/2 |
| Port Type: | Flange |
| Shaft Key: | 3/16 in |
| Pilot Type: | N/A |
Product Details
| Weight | 30.0 LB |
| Mounting | Flange Mount |
| Rotation | Right Hand (CW) |
| Model No. | V2010-1F12S2S-1DD12 |
| Port Size | 1 1/2 |
| Port Type | Flange |
| Shaft Key | 3/16 in |
| Pilot Type | N/A |
| Shaft Dia. | 0.875 in |
| Shaft Type | Straight w/ Key |
| Pump Series | V2010 |
| Shaft Length | 2.3125 in |
| Seal Material | Buna-N |
| Max. RPM [Max | 2400 |
| Minor Diameter | N/A |
| Mounting Flange | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Cover End RPM [Max | 3000 |
| Shaft End RPM [Max | 2400 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Manufacturer Part No. | V2010-1F12S2S-1DD12 |
| Cover End Pressure [Max | 2500 |
| Shaft End Pressure [Max | 2200 |
| GPM @ 1,800 rpm, Cover End | 3 |
| GPM @ 1,800 rpm, Shaft End | 18 |
| Integral Valve Configuration | N/A |
| Port Orientation - Cover End | Outlet 135° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End | 1/2 in SAE O-Ring |
| Pressure Port Size, Shaft End | 3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) | 0.4 |
| Displacement Shaft End (cu in/revolution) | 2.38 |
