NACHI IPH-46B-32-125-11 IPH Double Gear Pump
With 20 Width (mm) over 10170 full-service stores, 0,038 Kg Weight our NACHI IPH-46B-32-125-11 IPH Double Gear Pump inventory is extensive and our parts are priced right. 26x34x20 within 24 hours. BEARING MANUFACTURING DE MEXICO,S.A.DE C.V. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is IPH-46B-32-125-11 bearing interchange？
| Brand Name: | NACHI |
| Model Number: | IPH-46B-32-125-11 |
| Weight: | 76.0 LB |
| Mounting: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| Model No.: | 3525V35A17-1CC22L |
| Port Size: | 3 |
| Port Type: | Flange |
| Shaft Key: | 5/16 in |
| Pilot Type: | Standard Pilot |
Product Details
| Weight | 76.0 LB |
| Mounting | Flange Mount |
| Rotation | Left Hand (CCW) |
| Model No. | 3525V35A17-1CC22L |
| Port Size | 3 |
| Port Type | Flange |
| Shaft Key | 5/16 in |
| Pilot Type | Standard Pilot |
| Shaft Dia. | 1.25 in |
| Shaft Type | Straight w/ Key |
| Pump Series | 3525V |
| Shaft Length | 2 7/8 in |
| Seal Material | Buna-N |
| Max. RPM [Max | 1800 |
| Minor Diameter | N/A |
| Mounting Flange | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Spline Description | N/A |
| Cover End RPM [Max | 1800 |
| Shaft End RPM [Max | 1800 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 3525V35A17-1CC22L |
| Cover End Pressure [Max | 2500 |
| Shaft End Pressure [Max | 2500 |
| GPM @ 1,800 rpm, Cover End | 25.5 |
| GPM @ 1,800 rpm, Shaft End | 52.5 |
| Integral Valve Configuration | N/A |
| Port Orientation - Cover End | Outlet 45° CW from Inlet |
| Port Orientation - Shaft End | Outlet Inline w/Inlet |
| Pressure Port Size, Cover End | 1 in Code 61 |
| Pressure Port Size, Shaft End | 1 1/4 in Code 61 |
| Displacement Cover End (cu in/revolution) | 3.4 |
| Displacement Shaft End (cu in/revolution) | 6.8 |
